Anti-Vibration

Quiet Fans

AcoustiFan DustPROOF

3 Speed Cable Fitting

Archived Products

AcoustiPack Standard

AcoustiPack SFF

AP Antec Sonata II

The Antec Sonata II Case

AcoustiCase

Product Features

Arguably the most effective on the market
Effective dual-density composition
Dense but flexible - easy to cut and shape
Comprehensive fitting recommendations
Thoroughly tested to meet flammability standards

Fitting Recommendations

Fitting Recommendations v1.0 48Kb

SFF for Small Form Factor Cases

AcoustiPack SFF - designed to quieten down Small Form Factor enclosures. Image shows various popular SFF cases, including those by Shuttle and the Antec Aria with AP SFF materials in the foreground and packaging behind.

This product is a 'generic' kit of 3 sheets of our NEW 4mm acoustic composite soundproofing material. The AP SFF kit is intended for Small Form Factor (SFF) cases, and it may also be suitable for Home Theatre PCs, set-top boxes, gaming consoles, and other small electrical units.

The 4mm composite material is made from a 1mm dense acoustic barrier layer, and a 3mm acoustic foam. The combination of our dense and thin barrier and the foam together make this an effective solution for noise reduction. The material is very easy to cut and shape, and flexible. We have designed the soundproofing sheet dimensions to be generous enough to line most SFF cases, such as the entire range of Shuttle PC cases. Materials can be used to line the case roof, sides and there should be enough left over for smaller areas inside the case.

The AcoustiPack SFF - for small form factor cases. A picture of the acoustic materials - 3 sheets are shown, each 4mm thick. The acoustic foam is dark grey in colour, and the thin barrier layer is slightly darker (close to black).

Technical Specifications

3 Sheets of 4mm Acoustic Composite (compressible down to approx. 2.5mm)
Sheet Dimensions: 330 x 216mm [13.0" x 8.5"]
Packaging: Gross Weight 0.74Kg/Pack
Package Dimensions: 337 x 225 x 23mm

Packaging

Gross Weight 0.74Kg/Pack
Pack Dimensions: 337 x 225 x 23mm

Please take care to read the fitting directions before assembling this product. It is the responsibility of the machine builder to position the materials appropriately to facilitate the normal functioning of internal components.

Reviews and Feedback

Walibe.Com review the AcoustiPack™ SFF...

"... in short there is no better sound insulation material available for your Shuttle on the market today. It was easy to install thanks to how easy it was to cut and the ability to replace it a couple of times if you've stuck it on incorrectly. The difference it has made to cooling is a really nice side effect and where as I was concerned we would have a substantial increase in temperature, this has not been the case... Acousti Products have demonstrated why they are considered to be the best manufacture of silencing equipment for your PC... " Awarded 5/5 - Walibe.Com Excellence. [full review]

By P J Matthews -

top